Table of Contents
Advertisement
46
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Erasing Pictures (One-Frame Erase)
You can increase the number of images remaining on a card by erasing
unnecessary images.
OK/menu button
Arrow pad
1 /3
SELECT
3
Once erased, images cannot be
restored. Check each image before
erasing to avoid accidentally
erasing images you want to keep.
Press until the
monitor turns on.
NO
OFF
NO
NO
SET
OK
YES
OFF
NO
Operating Procedure
Check that the camera is set to the
Playback mode by holding down
the
monitor button for a moment.
1.
Display the frame to erase by press-
ing the
or
(The frame can also be selected even when
the 4-split or 9-split display is selected.)
2.
Press the
OK/menu button.
[The monitor shows the playback mode
menu 1/3.
3.
Select
by pressing the
arrow pad key.
4.
Select "YES" by pressing the
arrow pad key.
5.
Press the
OK/menu button.
[The selected image is erased.
The orange lamp on the right of the
viewfinder blinks during erasure.
To cancel single-frame erasure:
Select "NO" and press the
OK/menu button.
arrow pad key.
or
or
Hide quick links:
Advertisement
Table of Contents
