Switching on and off
By turning the Mode dial to any setting other than "OFF", the camera is
switched on.
Be sure to remove the lens cap.
1
Press in on each side of
2
the lens cap as shown in
the figure and remove the
lens cap.
2
Set the Mode dial to "P".
The camera switches on.
Setting the Mode dial to
"A/S/M", "P", or "
camera to a shooting mode.
The lens extends out from the
camera body and the remain-
ing battery charge and num-
ber
appear on the control panel.
When you set the Mode dial to
"
on in playback mode and the
monitor lights up.
3
When you have finished
using the camera, set the
Mode dial to "OFF".
The camera switches off.
The lens retracts into the cam-
era body and the monitor and
control panel switches off.
Always replace the lens cap
when the camera is not in
use.
52
" sets the
of
storable
pictures
" , the camera switches
P
2
1
3
OFF