Olympus Camedia C-3040Zoom Instructions Manual page 134

Using external flash
3
Set the Mode dial to "P" or
"A/S/M".
If you set the Mode dial to
"A/S/M", the monitor switches
on.
4
Switch the external flash
on.
The external flash mode is set
to "TTL-AUTO".
5
5
Select the camera's flash
mode.
The available flash modes are
" A u t o - F l a s h " , " R e d - E y e
Reduction Flash", "Forced
Flash" and "Flash Off". See
P.126 for more information on
using the flash.
You can also set the flash mode to Slow Synchro. (P.131)
If you use an external flash for close-up shots, the picture may be overex-
posed. Use the built-in flash only.
If you use both the built-in flash and the FL-40, the built-in flash is used only
as a supplementary light source. Consequently, if the amount of light from
the FL-40 is insufficient, the picture may turn out underexposed.
134
5 3
P