Connecting To A Computer Using The Communication Cable; Connecting Via A Usb Cable - Olympus Camedia C-3040Zoom Instructions Manual

Connecting to a computer using the communication cable

This section describes how to connect your camera to a personal computer
using the communication cable. Note that the connection method differs
depending on your computer hardware and software configuration. (P.200)

Connecting via a USB cable

- If you are using an IBM PC-compatible computer running Windows 98 or
Windows 98 Second Edition, the USB driver must be installed on your com-
puter beforehand. Refer to the CAMEDIA Master installation guide (con-
tained on the Software CD) on installing the driver.
- If you are using an Apple Macintosh computer running Mac OS 8.6, check
that you are running USB MASS Storage Support version 1.3.5.
1
Open the connector cover
on the camera.
2
Insert the plug marked
on the USB cable into the
USB port on the computer.
3
9
Insert the plug marked
on the USB cable into the
USB connector on the
camera.
4
Set the camera's Mode dial
to "
The computer recognizes the
selected card on the camera
as a disk drive (usually a
removable disk). On Macintosh
computers, the card appears
as a new folder on the desktop.
The images on the card can then be handled as files by file manage-
ment software such as Windows Explorer in the same way as files on
a floppy disk or MO disk.
You must break off the connection to the computer to do the following:
(P.200)
- Switch the mode
- Switch off the camera
198
".
A
B
USB connector
2
To USB port
1
USB cable
To the camera's
3
USB connector