Olympus Camedia C-3040Zoom Instructions Manual page 211

Problem:
I cannot protect images, erase frames (single or all), or initialize the
SmartMedia card.
Cause
qThere is a write-protect sticker on
the card.
Problem:
When the camera is connected to a computer, an error message appears
during data transfer.
Cause
qThe cable is not connected cor-
rectly.
wThe camera is switched off.
eThere are no batteries in the cam-
era.
rThe USB driver is not correctly
installed.
tThe serial port is not selected cor-
rectly.
Solution
qPeel the sticker off before using the
card. Do not re-use write-protect
stickers.
Solution
qCheck that the cable is connected
correctly.
wSet the Mode dial to "
eLoad new batteries or use the
optional AC adapter.
rCheck whether the camera is cor-
rectly recognized by the computer,
as laid out in the USB driver (or
CAMEDIA Master)
guide.
tUse the system software on the
computer to check that the serial
port is selected correctly.
Troubleshooting
See
P.35
See
P.196
P.198,201
".
P.29,33
installation
1 0
211