Stihl RMA 370 Instruction Manual page 9

An extension cord should not be used
unless absolutely necessary. If an
extension cord must be used, plug the
charger into a properly wired 16 gauge
(AWG 16) or heavier gauge extension
cord with blades that are the same
number, size and shapes as the blades
on the charger.
To reduce the risk of electric shock:
Always connect the charger to a
–
properly installed wall outlet.
Make sure the insulation of the
–
power supply cord and plug is in
good condition.
Unplug the power supply cord from the
outlet when charger is not in use.
Never store the battery in the charger.
THE USE OF THE POWER TOOL
Transporting the Unit
WARNING
To reduce the risk of injury from blade
contact, never carry or transport your
power tool with the cutting blade moving.
WARNING
Always switch off the power tool by
releasing the switch lever, remove the
fuse key and battery – even when you
carry the unit for short distances. When
transporting it in a vehicle, properly
secure the lawn mower and its parts
(e.g. grass box) to prevent turnover and
damage. Use ropes or straps to secure
the handles.
RMA 370
Remove the fuse key and
battery from the power
tool. This avoids the risk
of the motor starting
unintentionally.
Lift your cordless lawn mower by the
carrying grips only. See illustration
above and illustration in "Main Parts"
chapter. The cordless lawn mower can
be carried in two ways:
One hand on the upper carrying grip
–
and one hand on the lower carrying
grip.
One hand on the upper carrying
–
grip.
Always keep the cutting blade well at a
safe distance from your body, especially
your feet and legs.
Before Starting Work
WARNING
Always check your lawn mower for
proper condition and operation before
starting, particularly the switch lever and
switch lever lockout. The switch lever
and the switch lever lockout must move
freely and always spring back to the off
position. Never attempt to modify the
controls or safety devices.
WARNING
Never operate your lawn mower if it is
damaged, improperly adjusted or
maintained, or not completely or
securely assembled.
Keep the handles clean and dry at all
times; it is particularly important to keep
them free of moisture, pitch, oil, grease
or resin in order for you to maintain a firm
grip and properly control your lawn
mower.
WARNING
The cutting blade must be properly
tightened and in safe operating
condition. Inspect for loose parts (nuts,
screws, etc.). Regularly check the
condition and tightness of the cutting
blade – with the motor stopped, fuse key
and battery removed! Replace damaged
cutting blade before using the power
tool.
Do not use your lawn mower if safety
devices are damaged, the coasting
brake does not operate or safety devices
are not properly mounted and in working
order (e.g. ejection chute shield and
lower rear flap).
Inspect grass box frequently and replace
with authorized replacement if there are
signs of wear or deterioration. Never use
your machine with a damaged grass
box.
Check contacts in battery compartment
for foreign matter. Keep clean.
Fit the battery correctly.
Operate the machine only with the
battery compartment closed.
English
7