To Connect The Telephone Handset; To Connect It To The Power Supply; Setting Some Parameters (Indispensable For Correct Functioning); To Set The Language And The Country Of - Olivetti Jet-Lab 490 Instructions Manual

T
O CONNECT THE TELEPHONE HANDSET
1. Place the fax machine on its right side, insert the connector of the
handset cable into the socket marked with the symbol
fax machine and fix the cable into its groove.
2. Return the fax machine to its normal position and place the hand-
set in its seat.
T
O CONNECT IT TO THE POWER SUPPLY
1. Insert the female connector at one end of the power cable into the
male connector on the rear of the fax machine.
2. Then insert the plug at the other end of the cable into the wall
power socket.
The fax machine will remain permanently connected, ready
to receive and send documents 24 hours a day.
If you want to turn it off, detach the plug of the power cable
from the wall socket as the fax machine has no on/off switch.
S
ETTING SOME PARAMETERS
)
CORRECT FUNCTIONING
Once the fax is connected to the power supply, it automatically runs a
short test to check that its components are working and the display
may show:
the language in which the messages will be displayed or the word
"AUTOMATIC" and, alternating on the second line, the messages
"SET DATE/TIME" and "CHECK PRINT HEAD".
In the first case, to enable the fax machine to work properly, you must
set the language and country in which it is to be used as described in
the procedure below.
In the second case, you can move on to set the date and time directly.
T
O SET THE LANGUAGE AND THE COUNTRY
OF DESTINATION
The display shows the language in which the messages
are displayed. For example:
| }
/ To select the desired language. For example:
To confirm the setting. The display shows:
4
on the
(
INDISPENSABLE FOR
To confirm the setting. The display shows a country of des-
tination. For example:
| }
/ To select the desired country. For example:
If your country is not present among those shown on the
display, see the table below:
COUNTRY
Argentina
Australia
Austria
Belgium
Brazil
Chile
China
Colombia
Denmark
Finland
France
Germany
Greece
Holland
India
Israel
Italy
Luxembourg
Mexico
New Zealand
Norway
Peru
Portugal
Rest of world
South Africa
Spain
Sweden
Switzerland
Taiwan
UK
Uruguay
Venezuela
To confirm the setting.
To complete the procedure.
If you subsequently want to change these settings, press
+ and repeat the procedure from the start, remem-
bering always to confirm the settings made by pressing the
button.
Having set the language and the country, the following message will
appear on the display:
and alternating on the lower line:
COUNTRY TO BE SELECTED
AMERICA LATINA
NZL/AUSTRALIA
ÖSTERREICH
BELGIUM
BRASIL
AMERICA LATINA
CHINA
AMERICA LATINA
DANMARK
FINLAND
FRANCE
DEUTSCHLAND
GREECE
HOLLAND
INDIA
ISRAEL
ITALIA
BELGIUM
AMERICA LATINA
NZL/AUSTRALIA
NORGE
AMERICA LATINA
PORTUGAL
INTERNATIONAL
S. AFRICA
ESPAÑA
SVERIGE
SCHWEIZ
TAIWAN
U.K.
AMERICA LATINA
AMERICA LATINA