Connecting to a
Computer
Conducting
Wireless
Transactions
Using the Smart
Card Reader
Connect the e285 device to a PC or laptop to download applications.
1
Insert the USB-C plug into the USB-C port of the e285
2
Connect the other end of the USB-C plug into the host computer's USB port.
To conduct a wireless transaction:
•
Ensure the device is in an optimal position for transmitting.
•
Follow the on-screen instructions provided with your application.
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position the smart card with the contacts facing upward (see illustration
below).
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
3
Wait for the application to indicate a completed transaction before removing
the card. Premature card removal invalidates the transaction.
Figure 3
Inserting a Smart Card
D
S
EVICE
ETUP
Connecting to a Computer
285 I
G
E
NSTALLATION
UIDE
17