Generator Outputs/Output Terminal Connections - MULTIQUIP TLG8SSK4F Operation And Parts Manual

GENERATOR OUTPUTS/OUTPUT TERMINAL CONNECTIONS

GENERATOR OUTPUT VOLTAGES
A wide range of voltages are available to supply voltage
for many different applications. To obtain some of the
voltages listed in Table 6 will require a fine adjustment
using the voltage regulator (VR) control knob located
on the control panel.
Table 6. Voltages Available
UVWO Output
UVWO Terminal Output Voltages
Terminal Lugs
3Ø Line-Line 208V
1Ø Line-Neutral 120V
GFCI Receptacle Load Capability
The load capability of the GFCI receptacles is directly
related to the voltage being supplied at either the output
terminals.
Table 7 shows what amount of current is available at the
GFCI receptacles when the output terminals and twist lock
receptacles are in use. Be careful that your load does not to
exceed the available current capability at the receptacles.
Table 7. 3Ø Generator Maximum Amps
KVA in Use
(UVWO
Terminals)
3Ø 240V
7.5
6.9
6.3
5.7
5.1
UVWO TERMINAL OUTPUT VOLTAGES
Various output voltages can be obtained using the UVWO
output terminal lugs. The voltages at the terminals are
dependent the adjustment of the Voltage Regulator
Control Knob.
The voltage regulator (VR) allows the user to increase or
decrease the selected voltage.
PAGE 24 — TLG8SSK4F PORTABLE GENERATOR• OPERATION AND PARTS MANUAL — REV. #0 06/21/16)
220V 240V
127V 139V
Available Load
Current (Amps)
GFCI Duplex
5-20R 120V
0 amps/receptacle
5 amps/receptacle
10 amps/receptacle
15 amps/receptacle
20 amps/receptacle
3Ø-240V UVWO Terminal Output Voltages
1. Connect the load wires to the UVWO terminals as
shown in Figure 11.
Figure 11. UVWO Terminal Lugs
Ø Ø-139V
3 -240V/1
2. Turn the voltage regulator knob (Figure 12) clockwise
to increase voltage output. Turn counterclockwise
to decrease voltage output. Use voltage regulator
adjustment knob whenever fine tuning of the output
voltage is required.
Figure 12. Voltage Regulator Knob
3Ø-208V/1Ø-120V UVWO Terminal Output Voltages
1. Connect the load wires to the UVWO terminals as
shown in Figure 13.
Figure 13. UVWO Terminal Lugs
3Ø-208/1Ø-120V Connections Connections
NOTICE
To achieve a 3Ø-208V output, the voltage regulator
must be adjusted to 208V.
Connections