Media Setting - SATO CL4NX Operator's Manual

2 Installing the Printer

2.7.10 Media Setting

Load the media.
You can check the setting method of the media
through the video.
Press the button to select video mode.
Note (for CL4NX only)
When you are using the linerless model, the video is
shown immediately after the
The selection screen of the video for playback
shows. (Not available for linerless model of
CL4NX.)
Select the video to playback using the
buttons, then press the right soft button or
button to playback the video.
The options are as follows:
The options vary depending on the printer model.
Standard Model and Cutter Model
• Roll: Shows the video on how to load the media
roll.
• Fanfold: Shows the video on how to load the
fan-fold media.
Dispenser Model
• Dispenser: Shows the video on how to eject the
liner out of the printer.
• Rewinder: Shows the video on how to rewind
the liner in the printer.
Press the button to stop the video and return to
the previous screen.
After you complete the media setting, press the
right soft button to go to the next screen.
32
CL4NX/CL6NX Operator Manual
button is pressed.
/