SATO CL4NX Operator's Manual page 210

4 Operation and Configuration
Remove
Tools > HEX-Dump > Log Files > Remove
Delete the log files of the printer.
The procedure to delete the log files is as follows:
1. Select the file type to delete and press the
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file to delete and press the
on the right side of the file name.
3. After you select the file, press the right soft button to delete the
selected file.
Note
When Hex Dump Mode is set to Enabled, it may take some time before
the files are shown.
Print
Tools > HEX-Dump > Log Files > Print
Print a hex dump of the log files of the printer.
The procedure to print the log files is as follows:
1. Select the file type to print.
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file to print and press the
perform the dump print.
CAUTION
Printing the contents of the file may use a lot of media.
Note
When Hex Dump Mode is set to Enabled, it may take some time before
the files are shown.
208
CL4NX/CL6NX Operator Manual
button.
button. A checkmark shows
button or right soft button to