Replacing The Fuser Unit - Oki MC160N User Manual

Replacing the Fuser Unit

For optimum print quality and performance, use only approved Oki fuser unit for
your specific machine type.
1
Turn off the machine and discon-
nect the power cord.
Note
There are extremely hot parts within the machine. Before replacing the fuser
unit, wait about 20 minutes after turning off the machine, and then check that
the fusing section has reached room temperature, otherwise, you may get
burnt.
2
Open the scanner unit.
If there is paper in the output
tray, remove it, and then fold
up the output tray before
opening the scanner unit.
166 Replacing Consumables