Deleting a Queued Transmission Job
The list of jobs queued for transmission can be displayed, and a job can be
deleted.
1
In the main screen (Scan mode), press the up or down arrow key to select
CANCEL RESERV., and then press the Enter key.
2
Press the up or down arrow key to select the job to be deleted, and then
press the Enter key.
To check the information for the selected job, press the
If no jobs are queued for transmission, NONE appears.
3
Press the up or down arrow key to select YES, and then press the Enter key.
The main screen (Scan mode) appears again.
149 Using the Scanner
key.