Sign in today to find solutions:

Don't have an account? Sign up

   
SNMP
SPEED/DUPLEX
E-MAIL
SMTP
SETTING
SENDER NAME
E-MAIL ADDRESS
DEFAULT SUBJECT
SMTP SERVER
ADDR.
SMTP PORT NO.
55 Control Panel and Configuration Menu
Setting
DISABLE / ENABLE
Select whether or not to enable SNMP.
Setting
AUTO / 10BASE-T FULL /
10BASE-T HALF /
100BASE-TX FULL /
100BASE-TX HALF
Specifies the transmission speed for the
network and the transmission method for
bi-directional transmission.
Setting
DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is "OKI-MC160n".
Specify the E-mail address (up to 64
characters) of the E-mail sender used for
network scanning.
The default setting is blank.
Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is "From
OKI-MC160n".
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is "0.0.0.0".
Setting
1 to 65535 (Default: 25)
Specify the port number communicating
with the SMTP server.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: