Oki MC160N User Manual page 233

Symptom Cause
Image is One or more of the
blurred; toner cartridges may
background be defective.
is lightly
The imaging cartridge
stained;
may be defective.
there is
insufficient
The original glass is
gloss of the
dirty.
printed
image.
The original cover
pad is dirty.
The print or One or more of the
color density toner cartridges may
is uneven. be defective or low.
The imaging cartridge
may be defective.
The machine is not
level.
Irregular The media is moist
print or mot- from humidity.
tled image
appears.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
One or more of the
toner cartridges may
be defective.
The imaging cartridge
may be defective.
Solution
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Clean the original glass. For details,
refer to "Cleaning the Machine" on
page 178.
Clean the original cover pad. For
details, refer to "Cleaning the Machine"
on page 178.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Place the machine on a flat, hard, level
surface.
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Use Oki approved media.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
233 Troubleshooting