Oki MC160N User Manual page 229

Symptom Cause
With N-up on Both the printer driver
multiple cop- and the application
ies, the out- have been set for col-
put is lation.
incorrect.
Booklet Left Both the printer driver
and Right and the application
Binding out- have been set for col-
put is incor- lation.
rect.
You hear The machine is not
unusual level.
noises.
The tray is not
installed correctly.
There is a foreign
object stuck inside
the machine.
When copy- A malfunction may
ing or scan- have occurred while
ning with the paper was being
ADF, a band transferred with the
appears at ADF.
the end of
the image or
paper (5 to 6
mm).
Cannot copy Envelope DL or
with the ADF. Envelope C6 is set to
the ADF.
Scanned Resolution is set to
images are 150 x 150 dpi while
noisy. the scan mode is set
to MIX or TEXT.
Some areas Acrobat 8 (Macintosh
of the version) is used for
scanned scanning the image.
image are
missing.
Solution
For N-up on multiple copies, choose
Collate only in the printer driver's Basic
Tab. Do not set collation in the applica-
tion.
For Booklet Left Binding and Booklet
Right Binding, choose Collate only in
the printer driver's Basic Tab. Do not
set collation in the application.
Place the machine on a flat, hard, level
surface.
Remove the tray that you are printing
from and reinsert it completely into the
machine.
Turn off the machine and remove the
object. If you cannot remove it, contact
Technical Support.
If a band appears in the copy after
copying, select a copy density setting
that is one level darker.
If a band appears in the image after
scanning, scan using the original
glass.
Place the document on the original
glass. With the Envelope DL size,
some areas may not be copied.
Set the scan mode to PHOTO.
With the Acrobat Scan setting, turn off
the OCR and Filtering functions.
229 Troubleshooting