ZyXEL Communications MES3500 series User Manual page 97

Layer 2 management switch
Hide thumbs Also See for MES3500 series:
Table of Contents

Advertisement

Figure 42 Advanced Application > VLAN > VLAN Port Setting > Subnet Based VLAN
The following table describes the labels in this screen.
Table 21 Advanced Application > VLAN > VLAN Port Setting > Subnet Based VLAN
LABEL
DESCRIPTION
Active
Check this box to activate this subnet based VLANs on the Switch.
DHCP-Vlan
When DHCP snooping is enabled DHCP clients can renew their IP address through the DHCP
Override
VLAN or via another DHCP server on the subnet based VLAN.
Select this checkbox to force the DHCP clients in this IP subnet to obtain their IP addresses
through the DHCP VLAN.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Active
Check this box to activate the IP subnet VLAN you are creating or editing.
Name
Enter up to 32 alphanumeric characters to identify this subnet based VLAN.
IP
Enter the IP address of the subnet for which you want to configure this subnet based VLAN.
Mask-Bits
Enter the bit number of the subnet mask. To find the bit number, convert the subnet mask
to binary format and add all the 1's together. Take "255.255.255.0" for example. 255
converts to eight 1s in binary. There are three 255s, so add three eights together and you
get the bit number (24).
VID
Enter the ID of a VLAN with which the untagged frames from the IP subnet specified in this
subnet based VLAN are tagged. This must be an existing VLAN which you defined in the
Advanced Applications > VLAN screens.
Priority
Select the priority level that the Switch assigns to frames belonging to this VLAN.
Add
Click Add to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 9 VLAN
MES3500 Series User's Guide
97

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents