ZyXEL Communications MES3500 series User Manual page 307

Layer 2 management switch
Hide thumbs Also See for MES3500 series:
Table of Contents

Advertisement

Table 143 SNMP System Traps (continued)
OPTION
OBJECT LABEL
externalalar
ExternalAlarmEventOn
m
ExternalAlarmEventClear
dyinggasp
DyingGaspEventOn
Table 144 SNMP Interface Traps
OPTION
OBJECT LABEL
linkup
linkUp
LinkDownEventClear
linkdown
linkDown
LinkDownEventOn
lldp
LLDPRemoteTopologyChange
transceiver
transceiverddmiEventOn
-ddmi
transceiverddmiEventClear
Chapter 40 Access Control
OBJECT ID
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.80.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
1.3.6.1.4.1.890.1.5.8.80.27.2.2
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.80.27.2.1
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
1.3.6.1.4.1.890.1.5.8.80.27.2.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.80.27.2.1
1.0.8802.1.1.2.0.0.1
1.3.6.1.4.1.890.1.5.8.68.27.2.1
1.3.6.1.4.1.890.1.5.8.57.27.2.1
1.3.6.1.4.1.890.1.5.8.80.27.2.1
1.3.6.1.4.1.890.1.5.8.68.27.2.2
1.3.6.1.4.1.890.1.5.8.57.27.2.2
1.3.6.1.4.1.890.1.5.8.80.27.2.2
MES3500 Series User's Guide
307
DESCRIPTION
This trap is sent when the external alarm is
received.
This trap is sent when the external alarm
stops sending an alert.
The trap is sent when the device power goes
below the normal value.
DESCRIPTION
This trap is sent when the Ethernet link is
up.
This trap is sent when the Ethernet link is
up.
This trap is sent when the Ethernet link is
down.
This trap is sent when the Ethernet link is
down.
This trap is sent when the LLDP (Link Layer
Discovery Protocol) remote topology
changes.
This trap is sent when one of the device
operating parameters (such as transceiver
temperature, laser bias current,
transmitted optical power, received optical
power and transceiver supply voltage) is
above or below a factory set normal range.
This trap is sent when all device operating
parameters return to the normal operating
range.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents