ZyXEL Communications MES3500 series User Manual page 84

Note: You must configure a VLAN first.
Figure 33 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 14 Basic Setting > IP Setup
LABEL DESCRIPTION
Domain Name DNS (Domain Name System) is for mapping a domain name to its corresponding IP
Server address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Default Management IP Address
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP address,
subnet mask, a default gateway IP address and a domain name server IP address
automatically.
Static IP Address Select this option if you don't have a DHCP server or if you wish to assign static IP
address information to the Switch. You need to fill in the following fields when you
select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation for example
192.168.1.1.
IP Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal notation for example
255.255.255.0.
Chapter 8 Basic Setting
MES3500 Series User's Guide
84