Firmware Upgrade - Linksys LAPN300 User Manual

Firmware Upgrade

The firmware (software) in the wireless access point can be upgraded by using HTTP/HTTPS, or TFTP.
Check the Linksys support website (http://www.linksys.com/support) and download the latest
firmware release to your storage such as PC. Then, perform firmware upgrade by
following the steps below.
During firmware upgrade, do not power off device or disconnect the Ethernet cable. The access point
will reboot automatically after firmware upgrade is completed.
Figure 46: Firmware Upgrade Screen
To perform the firmware upgrade from local PC:
Browse
1. Click the
2. Select the upgrade file. Its name will appear in the
Upgrade
3. Click the
To perform the firmware upgrade from TFTP server:
1. Enter the IPv4 address of the TFTP server and the source file. The source file is the firmware
filename you stored in your TFTP server.
Upgrade
2. Click the
button and navigate to the location of the upgrade file.
button to commence the firmware upgrade.
button to commence the firmware upgrade.
Upgrade File
field.
73