The Administration - Factory Default Tab; The Administration - Firmware Upgrade Tab; Figure 6-20: Administration - Factory Default; Figure 6-21: Administration - Firmware Upgrade - Linksys WAP4400N - Small Business Wireless-N Access Point User Manual

Wireless-N Access Point with Power Over Ethernet

The Administration - Factory Default Tab

On this screen you can restore the Access Point's factory default settings.
Factory Default
Note any custom settings before you restore the factory defaults. Once the Access Point is reset, you will have to
re-enter all of your configuration settings.
Restore Factory Defaults. To restore the Access Point's factory default settings, click the Yes radio button.
Then, click Save Settings. Your Access Point will reboot and come back up with the factory default settings in a
few seconds.
Click Save Settings to apply your change, or click Cancel Changes to cancel your change. Help information is

Figure 6-20: Administration - Factory Default

displayed on the right-hand side of the screen.

The Administration - Firmware Upgrade Tab

On this screen you can upgrade the Access Point's firmware. Do not upgrade the firmware unless you are
experiencing problems with the Access Point or the new firmware has a feature you want to use.
Firmware Upgrade
Before you upgrade the Access Point's firmware, note all of your custom settings. After you upgrade its firmware,
you will have to re-enter all of your configuration settings. To upgrade the Access Point's firmware:
1. Download the firmware upgrade file from the Linksys website, www.linksys.com.
2. Extract the firmware upgrade file on your computer.

Figure 6-21: Administration - Firmware Upgrade

3. On the Firmware Upgrade screen, enter the location of the firmware upgrade file in the field provided, or click
the Browse button to find the file.
4. Click the Upgrade button, and follow the on-screen instructions.
Help information is displayed on the right-hand side of the screen.
32
Chapter 6: Configuring the Wireless-N Access Point
The Administration - Factory Default Tab