Using 802.1X Mode (Without Wpa) - Linksys LAPN300 User Manual

Using 802.1x Mode (without WPA)

This is very similar to using WPA-Enterprise.
The key is provided for me
The only difference is that on your client, you must NOT enable the setting
automatically
.
Instead, you must enter the WEP key manually, ensuring it matches the WEP key used on the access
point.
Figure 78: Properties Screen
Note—On some systems, the 64-bit WEP key is shown as 40-bit and the 128-bit WEP key is shown
as 104-bit. This difference arises because the key input by the user is 24 bits less than the key size
used for encryption.
111