Linksys LAPN300 User Manual page 56

Portal Profiles Screen
Portal Profiles
Captive Portal
Profile
Protocol
Authentication
Landing Page
Redirect to Original
URL
Promotion URL
Session Timeout
Local Authentication
Group Name
Select a profile to configure.
Select the protocol used to access the Portal
Authentication web server. It can be HTTP or HTTPS.
Select an authentication method for clients.
Local - The access point uses a local database to
authenticate wireless clients.
Radius - The access point uses a database on a remote
RADIUS server to authenticate wireless clients. The
RADIUS server must support EAP-MD5.
Password Only - Wireless clients only need a
password. Username is unnecessary.
No Password - Wireless clients accept defined terms
to access the wireless network. Password and
username both are unnecessary.
Enable Landing
authenticated wireless clients will be directed after
logging in at Captive Portal. Choose
Promotion URL
.
If Landing Page is enabled, this setting redirects
authenticated wireless clients from the Captive Portal
login screen to the URL the user typed in.
Enter a URL to which authenticated clients will be
redirected from the Captive Portal login page. Landing
Page must be enabled and Redirect to Original URL
must be disabled.
Set the session time in minutes. The access point will
disconnect authenticated clients when the session
time expires. Session time can range from 0 to 1440
minutes. The default is 0 minutes, which means no
timeout.
Assigns an existing group to the profile. All users who
belong to the group are permitted to access the
network through this portal. The option 'Default'
means a group which includes all users.
Page to determine
Original URL
where
or
56