Internet Authentication Service (Radius) Setup - Linksys LAPN300 User Manual

Start
12. Click >
secedit /refreshpolicy machine_policy"
Enter "
effect.

Internet Authentication Service (RADIUS) Setup

1. Select Start > Programs > Administrative Tools > Internet Authentication Service.
2. Right-click on Clients, and select New Client.
Figure 65: Service Screen
3. Enter a name for the access point, click Next.
4. Enter the address or name of the wireless access point, and set the shared secret, as entered
on the Security Settings of the wireless access point.
5. Click Finish.
6. Right-click on
7. Assuming you are using EAP-TLS, name the policy ''eap-tls'', and click Next.
Run
; type ''cmd'' and press Enter.
Remote Access Policies
(This command may take a few minutes to take
New Remote Access Policy
, select .
99