Table of Contents
Advertisement
B-1 NVIDIA RAID BIOS Utility
Power-on the system and wait for the following screen to appear. Press the "F10"
key to enter its BIOS configuration utility.
Using the Define a New Array Window
If necessary, press the tab key to move from field to field until the appropriate field
is highlighted.
•
Selecting the RAID Mode
By default, this is set to Mirroring. To change to a different RAID mode,
press the down arrow key until the mode that you want appears in the RAID
Mode box—either Mirroring, Striping, Spanning, or Stripe Mirroring.
•
Selecting the Striping Block Size
Striping block size is given in kilobytes, and affects how data is arranged on
the disk. It is recommended to leave this value at the default Optimal, which
is 32KB, but the values can be between 4 KB and 128 KB.
•
Assigning the Disks
The disks that you enabled from the RAID Config BIOS setup page appear
in the Free Disks block. These are the drives that are available for use as
RAID array disks.
Appendix
Appendix B
B-1
Hide quick links:
Advertisement
Table of Contents
