Table of Contents
Advertisement
BIOS
PwerOn After Pwr-Fail
This item enables your computer to automatically restart or return to its last operat-
ing status after power returns from a power failure.
Off:
The system stays off after a power failure.
Former-Sts:
The system returns to the state it was in just prior to the power
failure.
4-6 PNP/PCI Configuration
This page lets the user to modify the PCI IRQ signals when various PCI cards are
inserted.
WARNING: Conflicting IRQ's may cause system unable to locate certain devices.
Resources Controlled By
Determines what controls system PNP/PCI resources. The default is Auto (ESCD).
Manual: PNP Card's resources are controlled manually. The "IRQ Resources" field
becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI and onboard devices.
Auto:
BIOS assigns the interrupt resource automatically.
Page 4-16
Figure 7: PNP/PCI Configuration Setup
Hide quick links:
Advertisement
Table of Contents
