Power Management Setup - Nvidia N61P User Manual

nVIDIA N61P/N61S/N61V

4.5.7 Power Management Setup

ACPI Function
ACPI Suspend Type
Power Management
Video Off Method
HDD Power Down
HDD Down In Suspend
Soft-Off by PBTN
WOL(PME#) From Soft-Off
WOR(RI#) From Soft-Off
Power-On by Alarm
x Date(of Month) Alarm
x Time(hh:mm:ss) Alarm
HPET Support
→←
↑ ↓ :Move Enter:Select
F5: Previous Values
・ ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI).
・ ACPI Suspend Type
This item allows you to select ACPI Suspend Type.
・ Power Management
This option is for choose ACPI mode (or grade) etc.
If system activity is not detected for 1 hour, all devices except CPU will
Min Saving be shut off. If this item is selected, Doze/Standby/Suspend Mode are not
available.
If system activity is not detected for 10 seconds, all devices except CPU
Max Saving
will be shut off.
・ Video off Method
V/HSYNC+Blank
Blank Screen
DPMS Support
・ HDD Power Down
When enabled, the hard-disk drives will power down after a set time of system inactivity.
All other devices remain active.
・ HDD Down In Suspend
This option allows you to enabled or disabled the HDD power down function in suspend
mode.
・ Soft-Off by PBTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-
Off state.
・ WOL (PME#) From Soft-Off
When enabled, NV LAN activity awakens the system from soft-off state.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
[Enabled] Enabled
S1(POS)
[User Define]
[DPMS Support]
[Disabled]
[Disabled]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
0
0 : 0 : 0
[Disabled]
+/-/PU/PD:Value
F6: Fail-Safe Defaults
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.( default)
F10:Save ESC:Exit
F7: Optimized Defaults
- 2 -
User's /Manual
Item Help
Menu Level ►
F1:General Help