Power Management Setup - Nvidia MCP65S Series User Manual

Hard Disk Write Protect
Disable/ Enable device write protection. This will be effective only if device is
accessed through BIOS.
3-8

Power Management Setup

The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use
.
CMOS Setup Utility-Copyright(c) 1985-2005 America Megatrends, Inc
APM Configuration
Power Management APM
Power Button Mode
Video Power Down Mode
Hard Disk Power Down Mode
Hard Disk Time out (Minute)
APM Resume Event Configuration
Resume on PME#
Resume on PCIE Wake#
Resume on Ring
Resume By RTC Alarm
↑↓<->: Move
Enter: Select
Help F7: Previous values F8: Fail-safe Defaults
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.
Video Power Down Mode
Power Down vide in suspend or standby Mode.
Resume On PME#
Disabled/Enable PME to generate a wake event.
Resume On PCIE wake
Disable/Enable PCIE PME to generate a wake event.
Resume on Ring
Disable/Enable RI to generate a wake event.
Resume By RTC Alarm
Disable/Enable RTC to generate a wake event.
Power Management Setup
Enabled
On/Off
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
+/-/: Value F10: Save
29
Item Help
Menu Level >
ESC: Exit F1: General
F9: Optimized Defaults