Nvidia N61P User Manual page 29

nVIDIA N61P/N61S/N61V
・ IR Transmission Delay
Available options: [Disabled] [Enabled]
・ UR2 Duplex Mode
This item allows user choose IR mode.
Available options: [Full], [Half]
・ Use IR Pins
Available options: [IR-Rx2Tx2] [RxD2,TxD2]
・ Onboard Parallel Port
This item specifies the I/O address used by the parallel port.
[Disabled]: This option prevents the parallel port from accessing any system resources.
When the value of this option is set to [Disabled], the printer port becomes
unavailable.
[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port
[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port
[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port
・ Parallel Port Mode
This item specifies the parallel port mode.
[Normal]: Allow the standard parallel port mode to be used.
[SPP]: (Standard Parallel Port) Allow bi-directional parallel port operation at normal
speed.
[EPP]: (Enhanced Parallel Port) Allow bi-directional parallel port operation at maximum
speed.
[ECP]: (Extended Capabilities Port) Allow bi-directional parallel port operation at a
speed faster than the normal mode's data transfer rate.
[ECP+EPP]: Allow parallel port operation at ECP and EPP mode.
EPP Mode Select
This item selects the EPP mode.
ECP Mode Use DMA
This item selects the DMA channel of the parallel port.
・ PWRON after PWR-Fail
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
address. The majority of parallel ports on computer systems use IRQ7
and I/O Port 378H as the standard setting.
address.
address.
- 2 -
User's /Manual