Table of Contents
Advertisement
3-7-2
Onboard Device
Onboard Lan
Onboard Lan Boot ROM
Onchip USB
USB Memory Type
USB Keyboard/Storage Support
HD Audio
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
HD Audio
This item allows you to decide to enable/disable the chipset family to support HD Audio.
The settings are: Enabled, Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
3-7-3
Super IO Function Setup
Onboard FDC Controller
Onboard Serial Port 1
UART Mode Select
IrDA Duplex Mode
PWRON After PWR-Fail
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) installed on the system board
and you wish to use it. If you install add-on FDC or the system has no floppy drive, select
Disabled in this field. The settings are: Enabled and Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and the second serial ports. The
settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
3-8
Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
Enable
Disabled
V1.1+V2.0
Shadow
Enabled
Auto
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Super IO Function
Enabled
3F8/IRQ4
IrDA
Half
Off
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
Menu Level >>
F7:Standard Defaults
25
Item Help
Item Help
Advertisement
Table of Contents
