Table of Contents
Advertisement
Adjusting the sound
The sound adjustments made as below will have an effect on the projector
speakers. Be sure you have made a correct connection to the projector audio
input. See
"Connection" on page 25
INPUT SOURCE
Computer
HDMI
VIDEO
S-VIDEO
Muting the sound
To temporarily turn off the sound,
• Using the remote control
Press MUTE to temporarily turn off the sound. While the sound is off, the
screen will display
To restore the sound, press MUTE again.
• Using the OSD menu
1.
Press MENU/EXIT and then press ◄/► until the System Setup:
Advanced menu is highlighted.
2.
Press ▼ to highlight Audio Settings and press MODE/ENTER.
The Audio Settings page displays.
3.
Highlight Mute and press ◄/► to select On.
4.
To restore the sound, repeat steps 1-3 and press ◄/► to select Off.
Adjusting the sound level
To adjust the sound level,
• Using the remote control
Press
or
• Using the OSD menu
1.
Repeat steps 1-2 above.
2.
Press ▼ to highlight Volume and press ◄/► to select a desired sound
level.
Operation
AUDIO IN
in the upper right corner of the screen.
to select a desired sound level.
for how the audio input is connected.
mini jack
HDMI
RCA
RCA
AUDIO OUT
mini jack
mini jack
mini jack
mini jack
47
Advertisement
Table of Contents
