Table of Contents
Advertisement
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture.
Use the direction arrow keys for navigating the picture.
• Using the remote control
1.
Press Digital Zoom+/- to display the Zoom bar. Press Digital
Zoom+ to magnify the center of the picture. Press the key repeatedly
until the picture size is suitable for your need.
2.
Use the directional arrows (▲, ▼, ◄, ►) on the projector or remote
control to navigate the picture.
3.
To restore the picture to its original size, press AUTO. You can also
press Digital Zoom-. When the key is pressed again, the picture is
further reduced until it is restored to the original size.
• Using the OSD menu
1.
Press MENU/EXIT and then press ◄/► until the Display menu is
highlighted.
2.
Press ▼ to highlight Digital Zoom and press MODE/ENTER. The
Zoom bar displays.
3.
Press ▼ on the projector repeatedly to magnify the picture to a desired
size.
4.
To navigate the picture, press MODE/ENTER to switch to the paning
mode and press the directional arrows (▲, ▼, ◄, ►) to navigate the
picture.
5.
To reduce size of the picture, press MODE/ENTER to switch back to
the zoom in/out functionality, and press AUTO to restore the picture
to its original size. You can also press ▼ repeatedly until it is restored to
the original size.
The picture can only be navigated after the picture is magnified. You can
further magnify the picture while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most
analog TV and computers are in 4:3 ratio, and digital TV and DVDs are
usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this
projector can dynamically stretch and scale the image output to a different
aspect than that of the image input signal.
To change the projected image ratio (no matter what aspect the source is):
• Using the remote control
1.
Press Aspect to show the current setting.
2.
Press Aspect repeatedly to select an aspect ratio to suit the format of
the video signal and your display requirements.
36
Operation
Advertisement
Table of Contents
