ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
The following table explains the fields of the System page:
Setting
Access Point Information
Access Point Name
Ethernet MAC Address
Wireless MAC Address
for 2.4 GHz
Wireless MAC Address
for 5 GHz
Ethernet LLDP
Country/Region
Firmware Version
Description
The NetBIOS name. For information about how to change the default name, see
Configure Basic General System Settings and Time Settings
The MAC address of the wireless access point's Ethernet port.
The MAC address of the wireless access point's wireless card when operating at 2.4
GHz.
The MAC address of the wireless access point's wireless card when operating at 5
GHz.
Enabled indicates that LLDP is enabled. Disabled indicates that it is not.
The country or region for which the wireless access point is licensed for use. For
information about how to change the country or region, see
System Settings and Time Settings
Note:
It might not be legal to operate this wireless access point in a country or region
other than one of those identified in this field.
The version of the firmware that is currently installed.
Management and Monitoring
62
on page 16.
Configure Basic General
on page 16.