NETGEAR WAC730 Reference Manual page 111

ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Table 3. Default configuration settings (continued)
Feature
Time zone
NTP client
Custom NTP server
Port speed
Ethernet MAC address
Radio and wireless settings
Operating mode
Wireless access point name
Country and region
Wireless communication
Wireless modes
Wireless network names (SSIDs)
Broadcast network names (SSIDs)
Radio frequency channels
MCS index/data rate (transmission speed)
Channel width
Guard interval
Output power
Wireless on/off (radio scheduling)
RTS threshold
Fragmentation length
Description
USA-Pacific
Enabled
Disabled
10/100/1000
See bottom label
Access point, infrastructure mode
netgearxxxxxx, where xxxxxx are the last 6 digits
of the wireless access point MAC address
Varies by region
2.4 GHz radio enabled
5 GHz radio enabled
11bg/ng/bgn
11a/a-na-ac
NETGEAR_11ng
NETGEAR_11ac
Enabled
11ng: Auto
11ac: Auto
Best
Note:
from IEEE Standard 802.11 specifications.
Actual throughput will vary. Network conditions
and environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
11ng: 20 MHz
11ac: Dynamic 20/40 MHz
Auto
Full
Disabled
2347
2346
Supplemental Information
111
Maximum wireless signal rate derived