NETGEAR WAC730 Reference Manual page 39

ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
Setting
Wireless Client Security
Separation
VLAN ID
5. (Optional) In the QoS Policies section, select a QoS policy from the Incoming menu,
Outgoing menu, or both. Depending on your selection, the policy is applied to incoming
packets, outgoing packets, or both incoming and outgoing packets, and is displayed in the
Policy Details fields.
Note: To be able to select a QoS policy, you must first configure one or more
policies (see
6. Click the Apply button.
Your settings are saved.
WARNING:
If you use a wireless computer to configure wireless security
settings, you are disconnected when you click the Apply button.
Reconfigure your wireless computer to match the new settings, or
access the wireless access point from a wired computer to make
further changes.
To change the QoS policy selection on the Edit Security Profile page:

1. From the menu from which you want select another QoS policy, select None.
2. Click the Apply button.
The old policy is removed from the security profile.
3. Select the new QoS policy from the same menu.
4. Click the Apply button.
Your settings are saved.
Configure Legacy 802.1X
To use legacy 802.1X security, you must define RADIUS server settings. For information
about RADIUS servers, see
When you select Legacy 802.1X from the Network Authentication menu, the Data
Encryption menu is automatically set to None. To use legacy 802.1X security, you must
define the RADIUS servers only.
Description
If you enable wireless client security separation by selecting Enable from the
menu, the associated wireless clients cannot communicate with each other. By
default, Disable is selected from the menu. This feature is intended for hotspots
and other public access situations.
Enter the VLAN ID to be associated with this wireless security profile. The
default VLAN ID is 1. The VLAN ID needs to match the VLAN ID that is used by
the other devices in your network.
Configure Quality of Service Policies
Configure RADIUS Server Settings
Wireless Configuration and Security
39
on page 81).
on page 41.