NETGEAR WAC730 Reference Manual page 38

ProSAFE Dual-Band Wireless AC Access Point WAC720 WAC730
for your wireless adapter and WPA or WPA2 client software for instructions about how
to configure WPA2 settings.
Setting Description
Network Authentication Open System
and Data Encryption
Note: The data
encryption fields that
Legacy 802.1X
display onpage depend
on your selection from
the Network
Authentication menu. WPA with RADIUS Configure the RADIUS server settings and select TKIP or
WPA2 with
RADIUS
WPA & WPA2 with
RADIUS
WPA-PSK
WPA2-PSK
WPA-PSK &
WPA2-PSK
This is the default setting. Use an open system without any
encryption.
See Configure Legacy 802.1X
Configure the RADIUS server settings. Encryption is not
supported.
See Configure Legacy 802.1X
TKIP + AES encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 40.
Configure the RADIUS server settings and select AES or
TKIP + AES encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 40.
Note: Select this setting only if all clients support WPA2.
Configure the RADIUS server setting. TKIP + AES
encryption is the default encryption.
See Configure WPA With RADIUS and WPA & WPA2 With
RADIUS on page 40.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Note: Select this setting only if all clients support WPA2.
Enter a WPA passphrase. TKIP + AES encryption is the
default encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
Wireless Configuration and Security
38
on page 39.
on page 39.
on page 40.
on page 40.
on page 40.