Built-In Lan (Local-Area Network) Device; Connection - Fujitsu LifeBook B2150 Instruction Manual

SECTION 1

10. Built-in LAN (local-area network) device

This item explains how to connect a LAN cable into the LAN connector.

Connection

WARNING
ELECTRIC SHOCK
Be sure to turn off your personal computer and disconnect the AC adaptor from it before
connecting a LAN cable to the computer, otherwise you might get an electric shock.
ELECTRIC SHOCK
When it thunders in the neighbourhood, immediately turn off your personal computer
and disconnect the AC adaptor and the LAN cable from it, otherwise your computer
might be struck and damage by lightning and thus cause a fire.
CAUTION
ELECTRIC SHOCK
Do not touch the LAN connector with your finger, otherwise you might get an electric
shock.
1 Turn off the computer and disconnect the AC adaptor from it.
2 Plug a LAN cable into the LAN connector on your personal computer to connect it to a
network.
Critical Point
To unplug the LAN cable from the LAN connector, pull the jack
while holding down the latch. Failure to do so might damage the
jack, cable or connector.
Your computer consumes more electric energy when it is connected
to a LAN. When using a LAN, therefore, it is advisable to use the
AC adaptor to supply power to your computer.
37