SECTION 2
4. Floppy Disk Unit
Installing a Floppy Disk Unit
The following explains the method to connect a floppy disk unit.
WARNING
ELECTRIC SHOCK
Always turn off the computer main
unit main switch and disconnect
the AC adaptor when installing or
removing a floppy disk unit in order
to avoid electric shock.
2
Connect the connector box to the rear
of the personal computer by their
respective connectors.
50
1
Turn off the main switch and
disconnect the AC adaptor.
Slide the main switch in the direction of the
arrow (to the
side).
Disconnect the AC adaptor from the main
unit.
3
Install the floppy disk unit.
Main switch