Fujitsu LifeBook B2150 Instruction Manual page 80

Setup Item
Interrupt
Base I/O address
DMA channel
Parallel port
Mode
I/O address
Interrupt
Table 1-4 Advanced - Serial/Parallel Port Configuration Menu options
Selections
IRQ 3
IRQ 4
IRQ 5
100-107
108-10F
110-117
118-11F
DMA 1
DMA 3
Disabled
Enabled
Auto
Output only
Bi-directional
ECP
378-37F
278-27F
3BC-3BF
IRQ 5
IRQ 7
Note (Item Specific Help)
S This option is available when Infrared port is
'Enabled'.
Set the interrupt for Infrared port.
S This option is available when Mode for Infrared
port is set to 'FIR'.
Set the base I/O address for the FIR of
Infrared port.
S This option is available when Mode for Infrared
port is set to 'FIR'.
Set the DMA channel for the FIR of Infrared
port.
S Configure parallel port using options:
[Disabled] No configuration
[Enabled] User configuration
[Auto] BIOS or OS chooses configuration
S This option is available when Parallel port is
'Enabled'. When you change this mode to
'ECP', 'DMA 1' is selected by default.
Set the mode for the parallel port.
S This option is available when Parallel port is
'Enabled'.
Set the base I/O address for the parallel port.
S This option is available when Serial port B is
'Enabled'.
Set the interrupt for the parallel port.
73