Loading/Ejecting a Floppy Disk
This item explains how to load and eject floppy disks.
Loading
Insert into the floppy disk drive.
Floppy disk
Insert the floppy disk with the label upwards
and the shutter side first until the EJECT
button springs out.
Critical Points
If you eject the floppy disk while the floppy disk unit's access lamp is still on, there is a risk of
losing the data on the disk.
When you do not want to erase the data saved
on the disk, or when you do not want to write
additional data, slide the floppy disk's write
protector so that the hole is open (WRITE
PROTECT state). When you want to write data
again, slide the write protector so that the hole
is closed.
EJECT button
Ejecting
Press the EJECT button.
Access lamp
EJECT button
Check that the floppy disk unit's access lamp
is out, then press the EJECT button.
Write protector
WRITE ENABLE
A 8
WRITE PROTECT
55