Connector Box; Connecting The Connector Box - Fujitsu LifeBook B2150 Instruction Manual

SECTION 1

9. Connector Box

Connecting the Connector Box

The following explains how to connect the connector box to the personal computer.
WARNING
ELECTRIC SHOCK
When connecting the connector
box to the personal computer, be
sure to turn off the MAIN switch of
the personal computer and
disconnect the AC adaptor from it
beforehand. If the connector box is
connected as the personal
computer is on, it may cause an
electric shock or a machine failure.
2 Connect the connector box to the
personal computer.
Open the cover of the connector box connector
located on the rear side of the personal
computer, and tightly connect the connector
box to the personal computer by their
respective connectors.
1 Turn off the MAIN switch of the
personal computer and disconnect
the AC adaptor from it.
Slide the MAIN switch in the direction of the
arrow (toward side).
Disconnect the AC adaptor from the personal
computer.
3 Lock the connector box by turning
the knob screws.
Knob screw
Tighten the right and left knob screws evenly
to lock the connector box.
Main switch
35