Table of Contents
Advertisement
3
Similarly, touch the [+] mark in each position (a total of nine positions).
–
–
Please touch nine red '+' marks with the attached pen.
[Home]: Test Screen [Tab]: Cursor on/off [Arrow Keys]: moved '+' marks
[Esc]: Cancel [Enter]: Next Screen
–
Critical Point
If you touch the [+] mark in a position twice in quick succession, move the mark with arrow
keys [ ← ], [ → ], [ ↓ ] and [ ↑ ], then touch it once again.
4
Press the Enter key.
A window appears on the screen to show the calibration result.
Critical Point
If the message "Correction Parameter Error" is displayed, click on OK and repeat the above
steps 2 though 4 once again.
+
+
+
+
+
+
15
Advertisement
Table of Contents
