Wireless Lan/ Bluetooth (Device-Dependent) / Umts (Device-Dependent); Switching The Wireless Components On And Off; Setting Up Wlan Access - Fujitsu LIFEBOOK A1130 Operating Manual

Working with the notebook
Wireless LAN/ Bluetooth (device-dependent)
/ UMTS (device-dependent)
The installation of a radio component not approved by Fujitsu Technology Solutions
GmbH will invalidate the certifications issued for this device (CE).

Switching the wireless components on and off

If you switch off the radio components, the wireless LAN transmission unit (antenna)
and, if present, the Bluetooth and UMTS module will also be switched off.
You can also deactivate the wireless components individually in the BIOS Setup.
For this to occur, you must either not have assigned a supervisor password or if a
supervisor password has been assigned, you must know this password.
Pay attention to the additional safety notes for devices with wireless
components provided in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.

Setting up WLAN access

• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
34
► Slide the ON/OFF switch into the "ON"
position to activate the radio components.
Bluetooth Bluetooth WirelessLAN WirelessLAN
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
radio components.
A26391-K214-Z200-1-7619, edition 1