Fujitsu LifeBook B2150 Instruction Manual page 79

1.2.1 Advanced - Serial/Parallel Port Configuration Menu
Main
Serial/Parallel Port Configuration
Serial port :
I/O Address:
Interrupt:
Infrared Port :
Mode:
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
Parallel Port:
Mode:
I/O Address:
Interrupt:
F1 Help
ESCExit
Figure 1-4 Advanced - Serial/Parallel Port Configuration Menu
Setup Item Selections
Serial Port Disabled
Enabled
Auto
I/O Address 3F8-3FF
2F8-2FF
3E8-3EF
2E8-2EF
Interrupt IRQ 3
IRQ 4
IRQ 5
Infrared Port Disabled
Enabled
Auto
Mode IrDA
FIR
I/O Address 3F8-3FF
2F8-2FF
3E8-3EF
2E8-2EF
72
PhoenixBIOS Setup Utility
Advanced Security Power
[Enabled]
[3F8-3FF]
[IRQ 4]
[Enabled]
[FIR]
[2E8-2EF]
[IRQ 3]
[118-11F]
[DMA 3]
[Enabled]
[Bi-directional]
[378-37F]
[IRQ 7]
↑↓
Select Item -/Space Change Value
←→
Select Menu Enter Select :Sub-Menu F10Save and Exit
Boot Info Exit
Item Specific Help
[Disabled]
The port is disabled
[Enabled]
The port is enabled
with user
configuration
[Auto]
A Plug & Play OS or
an ACPI OS will
configure the port.
F9 Setup Defaults
Note (Item Specific Help)
S Configure serial port A using options:
[Disabled] No configuration
[Enabled] User configuration
[Auto] BIOS or OS chooses configuration
S This option is available when Serial port A is
'Enabled'.
Set the base I/O address for serial port A.
S This option is available when Serial port A is
'Enabled'.
Set the interrupt for serial port A.
S Configure Infrared port using options:
[Disabled] No configuration
[Enabled] User configuration
[Auto] BIOS or OS chooses configuration
S Infrared port is 'Enabled'.
Infrared port is 'Disabled'.
S Set the base I/O address.