Table of Contents
Advertisement
Using the cover close switch
1
Close the LCD panel.
This unit goes into suspend mode using
the cover close switch.
Critical Point
When the BIOS setup Lid Closure Suspend
setting is "Disabled", this unit does not go
into suspend mode even if you close the
LCD panel.
Use the [Quit Windows] dialog.
1
Click the [START] button and then click
the [Quit Windows].
The [Quit Windows] dialog appears on the
display.
2
Click [Standby].
This computer is suspended.
Critical Point
If the BIOS setup Suspend Mode setting is "Suspend", suspend mode is ended in the follow-
ing cases. Save important data to the hard disk, etc.
• The main switch is switched off.
• In battery operation, the battery runs out.
(The battery is still used in suspend mode.)
If you start with the internal battery fully charged, suspend mode lasts about one day maxi-
mum with the AC adaptor not connected.
25
Advertisement
Table of Contents
