Table of Contents
Advertisement
Setup Item
Sectors
Maximum Capacity
Multi-Sector
Transfers
LBA Mode Control
PIO Transfer Mode
DMA Transfer Mode
Table 1-2 Main - Primary Master and Primary Slave Menu options
70
Selections
0 to 63
xxxx MB
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
Disabled
Enabled
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Disabled
Multiword DMA 1
Multiword DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
Note (Item Specific Help)
S
This item appears when 'Auto' is selected and
the type is identified as hard disk, or 'User' is
selected. When 'User' is selected, you can
change the value.
Specify the number of Sectors.
Display maximum capacity calculated from
parameters of hard disk when 'Auto' is
selected and the type is identified as hard
disk, or 'User' is selected.
S
This option can not be changed when 'Auto'
is selected.
Specify the number of sectors per block for
multiple sector transfer.
S
This option can not be changed when 'Auto'
is selected.
Enabling LBA causes Logical Block
Addressing to be used in place of Cylinders,
Heads & Sectors.
S
This option can not be changed when 'Auto'
is selected. Multi-word DMA is automatically
set to mode 1 for 'Fast PIO 1', 'Fast PIO 2',
'Fast PIO 3' and set to mode 2 for 'Fast PIO
4'.
Selects the method of moving data to/from
the drive. Autotype the drive to select the
optimum transfer mode.
S
You can not change this option when 'Auto' is
selected.
Selects the Ultra DMA mode used for moving
data to/from the drive. Autotype the drive to
select the optimum transfer mode.
Advertisement
Table of Contents
