Setting Time And Date [Time & Date] - Olympus DS-5500 Instructions Manual

Setting time and date [Time & Date]
If you set the time and date beforehand, the
information when the file is recorded is automatically
stored for each file. Setting the time and date
beforehand enables easier file management.
When you use the recorder for the first time
after purchasing it, or when the batteries
have been inserted without the device
being used for a long time, the time/date
setting screen will appear.
However, when a Password has been set
as the device lock function (☞ P.31), the
recorder will go to the time and date set
screen after verification (unlocking).
F1, F2, F3 button
OK/MENU button
+, − button
9, 0 button
1 Press the 9 or 0 button to select
the item to set.
Time & Date
10 14 2013
M D Y
5: 00
PM
BACK 24H EXIT
2 Press the + or − button to set.
Time & Date
10 14 2013
M D Y
5 : 45
PM
BACK 24H EXIT
• You can select the order of the "Month", "Day"
and "Year" by pressing the F2 (D/M/Y) button
while setting them.
3 Press the OK/MENU button to complete
the setting.
• The clock will start from the set date and time.
Press the OK/MENU button according to the
time signal.
Notes
• Moving the slide switch to a position other than
STOP (4) while setting the time and date will
cancel the time and date setting. The recorder will
return to the previous time and date.
• You can set the time and date from your PC using
ODMS and DSS Player software (☞ P.44).
Select the item from the
"hour", "minute", "year",
"month" and "day" with a
flashing point.
You can select between 12 and
24 hour display by pressing
the F2 (24H) button while
setting the hour and minute.
1
EN
19