Fcc Compliance; Industry Canada Compliance; Emi And Environmental Type Tests - Siemens RUGGEDCOM RX1500 Installation Manual

Chapter 6
Certification
Agency
Section 6.2

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Section 6.3

Industry Canada Compliance

CAN ICES-3 (A) / NMB-3 (A)
Section 6.4

EMI and Environmental Type Tests

The RX1500 has passed the following EMI and environmental tests.
IEC 61850-3 EMI Type Tests
Test
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
42
Description
ESD
Radiated RFI
Burst (Fast Transient)
Standards
Enclosure Contact
Enclosure Air
Enclosure Ports
Signal ports
D.C. Power ports
A.C. Power ports
Earth ground ports
RUGGEDCOM RX1500
Installation Guide
Comments
Cellular LM Models RX1500PN-W11-XX
RX1500PN-W12-XX RX1500PN-W32-XX
FCC ID for W11 and W12: N7NMC8705
FCC ID for W32: N7NMC8705/N7N-MC5728
IC ID for W11 and W12: 2417C-MC8705
IC ID for W32: 2417C-
MC8705/2417C-MC5728
Test Levels
+/- 8 kV
+/- 15 kV
20 V/m
+/- 4 kV @ 2.5 kHz
+/- 4 kV
+/- 4 kV
+/- 4 kV
FCC Compliance
Severity
Levels
4
4
a
Note
a
Note
4
4
4