RUGGEDCOM RS400
Installation Guide
Certification
The RS400 device has been thoroughly tested to guarantee its conformance with recognized standards and has
received approval from recognized regulatory agencies.
•
Section 6.1, "Agency Approvals"
•
Section 6.2, "FCC Compliance"
•
Section 6.3, "Industry Canada Compliance"
•
Section 6.4, "EMI and Environmental Type Tests"
Section 6.1
Agency Approvals
Agency
CSA
FCC
FDA/CDRH
CE
Section 6.2
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Section 6.3
Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
Agency Approvals
Standards
CSA C22.2 No. 60950-1, UL 60950-1
FCC Part 15, Class A
21 CFR Chapter I, Sub-chapter J
EN 60950-1, EN 61000-6-2,
EN55022, EN 60825-1, EN 50581
Chapter 6
Certification
Comments
Approved
Approved
Approved
Approved
29