Wan Modules - Siemens RUGGEDCOM RX1500 Installation Manual

RUGGEDCOM RX1500
Installation Guide
Section 3.4

WAN Modules

The RX1500 supports the following WAN (Wide Area Network) line modules:
NOTE
• Only one T1/E1 WAN module may be used per router.
• The TC1, TC2 and TC4 WAN modules comply with Part 68 of the FCC rules and requirements
adopted by ACTA. The product identifier is provided on a label on top of the modules. If requested,
this information must be provided to the telephone company.
• The TC1, TC2 and TC4 WAN modules meet the Industry Canada's CS-03 Part II, Issue 9 technical
specifications. The industry Canada registration number and model number is provided on a label on
top of the modules.
• The WAN modules TC1, TC2 and TC4 use only RJ48C connectors.
• The modules have no user serviceable parts and equipment must only be repaired by authorized
Siemens personnel only.
Figure 36: 1 × T1/E1 with RJ45 Ports (TC1)
Figure 38: 2 × T1/E1 with RJ45 Ports (TC2)
Figure 40: 4 × T1/E1 with RJ45 Ports (TC4)
The following is the pin-out for the BNC and RJ45 connectors:
WAN Modules
Figure 37: 1 × E1 with BNC Ports (E01)
Figure 39: 2 × E1 with BNC Ports (E02)
Chapter 3
Communication Ports
23